|
For metal buildings kits, metal storage building kits, and metal shop kits, Absolute Steel has you covered - literally. Fact is, we are the only US manufacturer of steel buildings that has such a large selection of metal buildings kit styles and colors. We manufacture our own buildings from US steel, using American labor.
We have shipped thousands of metal buildings kits to thousands of happy customers. Our metal storage building kits, shop building kits, and all of our building kits in general are designed to last. Over the years we have been commissioned to design and fabricate many different styles of metal buildings. Our metal buildings kits have included gambrel type structures, sloped roof with mansard eaves, portable metal storage buildings…just about everything you can imagine. That is one of the advantages of dealing with an actual manufacturer.
We would be pleased to go over with you any requirements you might have and we’ll respond quickly and professionally to your requests.
Our Standard Metal Buildings Kits Styles:
Sierra Metal Buildings Kit:
Perhaps our most favorite metal building kit, the Sierra represents the most seen common style and boasts our stand alone frame system.
The Stand Alone frame system easily allows you to clad or cover the outside of your building with most any type of exterior material without modifying the frame system or having to add steel components in order to affix the exterior materials of your choice.
Should you elect to use steel panels for the exterior, the panels go on vertically on the walls and roof which means up on the roof, they easily shed rain and snow.
Built on tradition, the Sierra series building is one of the friendliest and hassle-free of all building styles.
Get a quote!
|
Mohave Metal Storage Building Kits:
The Mohave Series metal storage building kit gives you all the engineering ruggedness of the Sierra but gives you just a bit more financial practicality at the same time.
Because the wall panels are put on horizontally, this means we were able to delete the wall girts (horizontal members that go from vertical upright to vertical upright) that are found in the Sierra Series.
Consequently the Mohave Series is a bit less expensive than the Sierra.
Application of the wall panels is done by putting the wall panels on horizontally and takes no special skills.
Get a quote!
|
Teton Metal Buildings Kit:
The Teton style was designed to blend in with a residential application for our metal storage buildings and does so beautifully.
The exterior panels are applied in a horizontal fashion and are simulated to look like wood shiplap siding.
When it comes to installation, affixing the panels on in a horizontal method from the ground up is not difficult and the heavy 26 gauge steel that these panels are made from ensures you years of rugged dependability.
12 eave extensions and the addition of metal soffit under the eaves compliment the Teton's residential style and appearance.
Get a quote!
|
Sonoran Metal Buildings Kit:
The Sonoran metal storage building is Absolute Steel’s version of a Quonset style” building but is a bit more stylish than the typical Quonset style because of the trim details on the corners and gables.
It is the most economical building style because it really has no frame components other than the main verticals and the main rafter system.
A beginner with limited tools has no problems erecting a Sonoran style metal storage building.
This style of building is not recommended for areas that receive substantial snowfall.
|
Gambrel Metal Storage Building Kits:
It’s no secret that the gambrel style metal storage building will give you storage space—that’s precisely why the style evolved from European farmers; they used the high roof space for storage and many times a second storage floor.
Based upon the varying spans and heights, the gambrel is not available on our automated quoting system but any of our representatives would be happy to discuss particulars and or pricing with you.
Call us at 877-833-3237 for a quote!
|
Maricopa Metal Buildings Kit:
The Maricopa is somewhat limited in size due to engineering requirements but as far as providing the homeowner with ample storage space, it certainly is capable of that. Here’s what we’d recommend as to size:
24’ or 30’ wide x 24’ long x 10.5 high front end and an 8.5’ high back end. There’s a 1/12 pitch to the roof so bear in mind, this building is not going to design to heavy snow loads.
Two (2) 10’ wide x 7’ high rollup doors can be centered on the front end.
Metal steel tile on front end can be included as an option and will be simulated to look like clay tile.
|
|
