Absolute Steel metal buildings are available in a variety of color choices for your steel panels.You can see the steel panel colors shown below.
Our structures utilize only the highest quality, 29-gauge and 26-gauge steel panels, protected with up to ten separate layers of coatings. These coatings are so good they come with a paint warranty against chalking, peeling or fading for up to 45 years.
Underwriters’ Laboratories – the most trusted resource across the globe for product safety certification – has given our steel panels an industry-leading UL 2218 Class 4 hail impact rating, and a UL 790 Class A fire-resistance rating.
You will not have to worry about the panel quality; all you will have to do is decide on a color combination for your structure. All applications including commercial, agricultural and residential are going to give you years of low maintenance and lasting beauty. Your finished structure is going to last a very long time.
Quality Exterior Metal Panels
Absolute Steel’s warranty is the best in the industry.
We are so confident in our exterior panels, that depending upon which panel you purchase, they have a 20 to 40 year warranty against fading, chalking, or peeling.
We think it important for you to know that Absolute Steel’s structure division and our metal roofing division are two of the largest independent distributors of metal panels in the USA. We know steel panels. Regardless of whether they are being used for roofing or exterior walls, our expertise has been built through years of experience and substantiated by thousands of satisfied customers.
Incredibly Durable Paint Finishes
A very important factor in your choice of paneling should be the paint finish.
The panels we will supply you have a ten-layer protective finish topped with Enduracote – a coating system that takes performance to a new level. This system offers unbeatable durability, superior color retention and resistance to dirt accumulation. Enduracote is the choice for low-maintenance, lasting beauty and outstanding value.
You can rest assured that that all our exterior metal panels carry the best guarantee in the industry:
- Standard galvanized coating
- 30-year non-prorated film integrity warranty for walls and roofs
- Up to a 40-year warranty against fade and chalk for walls and roofs.
Highest Yield Strength
Highest Yield Strength is a measurement of stress tolerance in sheet metal. To determine its rating, a sheet of material is subjected to extreme stress so as to find the point at which it undergoes a permanent strain – where it begins to yield or go plastic.
We are only supply the best, so we provide panels are rated at yield strength of 80,000 pounds. That’s 40 tons of pressure per square inch. Translation: This is some tough stuff.
Colors are approximate representations. Keep in mind that due to variations in computer monitor and printer settings, these colors may not be entirely accurate. 29 gauge panels are available in all colors below. 26 gauge panels are available in limited colors, noted by * next to the color name.
For technical details on all our roof and wall panels, you’re welcome to visit our sister site, Metal Roofing Source.
Want a Real Person?
Please call us toll-free at 1-877-833-3237
with any questions or quote needs! We are here to help.
Customer service and pricing available from 8:00 am to 5:00 pm Arizona time Monday – Friday.