Steel Carport Color Selection : Choose Your Panel and Trim Colors

Absolute Steel carports are available in a variety of color choices for your steel panels. When you choose a color for your carport, you are choosing the colors of your panel and trim. The panel and trim can be the same color, or different colors from our color palette below.

The above carport utilizes the optional side panels. When you choose your colors you will choose
roof and optional side/rear panels, as well as trim color.

Above: Base carport package with roof panels and eave trim.

Our carports utilize only the highest quality, 29-gauge and 26-gauge steel panels, protected with up to ten separate layers of coatings. These coatings are so good they come with a paint warranty against chalking, peeling or fading for up to 45 years.

Exterior Metal Panels

We think it important for you to know that Absolute Steel’s structure division and our metal roofing division, online at Metal Roofing Source, are two of the largest independent distributors of metal panels in the USA. We know steel panels. Regardless of whether they are being used for roofing or exterior walls, our expertise has been built through years of experience and substantiated by thousands of satisfied customers.

Incredibly Durable Paint Finishes

A very important factor in your choice of paneling should be the paint finish.

The panels we will supply you have a ten-layer protective finish topped with Enduracote – a coating system that takes performance to a new level. This system offers unbeatable durability, superior color retention and resistance to dirt accumulation. Enduracote is the choice for low-maintenance, lasting beauty and outstanding value.

You can rest assured that that all our exterior metal panels are made in America and carry the best guarantee in the industry:

Standard galvanized coating
30-year non-prorated film integrity warranty for walls and roofs
Up to a 40-year warranty against fade and chalk for walls and roofs.

Highest Yield Strength

Highest Yield Strength is a measurement of stress tolerance in sheet metal. To determine its rating, a sheet of material is subjected to extreme stress so as to find the point at which it undergoes a permanent strain – where it begins to yield or go plastic.

We are only supply the best, so we provide panels are rated at yield strength of 80,000 pounds. That’s 40 tons of pressure per square inch. Translation: This is some tough stuff.

Underwriters’ Laboratories – the most trusted resource across the globe for product safety certification – has given our steel panels an industry-leading UL 2218 Class 4 hail impact rating, and a UL 790 Class A fire-resistance rating.

Color Selection

Colors are approximate representations. Keep in mind that due to variations in computer monitor and printer settings, these colors may not be entirely accurate. 29 gauge panels are available in all colors below. 26 gauge panels are available in limited colors, noted by * next to the color name.

Buckskin